fdh / fdll 300 / a / 333 ? high contraction low leakage diode ? 1997 fairchild semiconductor corporation www.fairchildsemi.com fdh / fdll 300 / a / 333 rev. 1.1.0 1 april 2013 fdh / fdll 300 / a / 333 high contraction low leakage diode absolute maximum ratings (1) stresses exceeding the absolute maximum ratings may damage the device. the device may not function or be opera- ble above the recommended operating conditions and stressing the parts to these levels is not recommended. in addi- tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. the absolute maximum ratings are stress ratings only. values are at t a = 25c unless otherwise noted. note: 1. these ratings are limiting values above which the serviceability of the diode may be impaired. these ratings are bansed on a maximum junction temperature of 200 c. these are steady state limits. the factory should be consulted on applications involving pulsed or low duty cycle operations. thermal characteristics values are at t a = 25c unless otherwise noted. symbol parameter value units w iv working inverse voltage 125 v i o average rectified forward current 200 ma i f dc forward current 500 ma i f recurrent peak forward current 600 ma i fsm non-repetitive peak forward surge current pulse width = 1.0 s 1.0 a pulse width = 1.0 s4.0 a t stg storage temperature range -65 to +200 c t j operating junction temperature 175 c symbol parameter max. units fdh / fdll 400 p d power dissipation 500 mw derate above 25c 3.33 mw/c r ja thermal resistance, junction to ambient 300 c/w ll-34 the placement of the expansion gap has no relationship to the location of the cathode terminal ll-34 color band marking device 1st band do-35 fdll300 white fdll300a white cathode is denoted with a black band -1st band denotes cathode terminal and has wider width fdll333 white cathode band sod80
fdh / fdll 300 / a / 333 ? high contraction low leakage diode ? 1997 fairchild semiconductor corporation www.fairchildsemi.com fdh / fdll 300 / a / 333 rev. 1.1.0 2 electrical characteristics values are at t a = 25 c unless otherwise noted . symbol parameter test conditions min. max. units v r breakdown voltage i r = 100 a150v v f f o r w a r d v o l t a g e fdh / fdll 300 / a i f = 1.0 ma 680 mv fdh / fdll 300 i f = 5.0 ma 750 mv fdh / fdll 300a i f = 5.0 ma 760 mv fdh / fdll 300 / a i f = 10 ma 800 mv fdh / fdll 300 i f = 50 ma 880 mv fdh / fdll 300a i f = 50 ma 890 mv fdh / fdll 300 / a i f = 100 ma 920 mv fdh / fdll 300 / a i f = 200 ma 1.0 v fdh / fdll 333 i f = 50 ma 800 890 mv i f = 100 ma 830 940 mv i f = 150 ma 860 970 mv i f = 200 ma 0.87 1.05 v i f = 250 ma 0.88 1.08 v i f = 300 ma 0.9 1.15 v i r reverse leakage fdh / fdll 300 / a v r = 125 v 1.0 n a v r = 125 v, t a = 150 c3.0 a fdh / fdll 333 v r = 125 v 3.0 n a v r = 125 v, t a = 100 c500 n a c o diode capacitance v r = 0, f = 1.0 mhz 6.0 pf
fdh / fdll 300 / a / 333 ? high contraction low leakage diode ? 1997 fairchild semiconductor corporation www.fairchildsemi.com fdh / fdll 300 / a / 333 rev. 1.1.0 3 physical dimensions figure 1. 2-terminal, sod-80 , jedec do-213ac, mini-melf package drawings are provided as a service to customers considering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawing and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package specifications do not expand the terms of fairchild?s worldwide terms and conditions, specifically the warranty therein, which covers fairchild products. always visit fairchild semiconductor?s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ . for current tape and reel specifications, visit fairchild semiconductor?s online packaging area: http://www.fairchildsemi.com/packaging/tr/sod80a_tnr.pdf . 1.50 1.30 c r 0.30 0.20 2.64 ref 0.50 0.30 3.60 3.30 notes: unless otherwise specified a) package standard reference: jedec do-213, variation ac. b) all dimensions are in millimeters. c corner radius is optional. d) drawing file name: sod80a rev01 sod-80
fdh / fdll 300 / a / 333 ? high contraction low leakage diode ? 1997 fairchild semiconductor corporation www.fairchildsemi.com fdh / fdll 300 / a / 333 rev. 1.1.0 4 physical dimensions (continued) figure 2. axial leaded, glass, jedec do204, variation ah (active) package drawings are provided as a service to customers considering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawing and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package specifications do not expand the terms of fairchild?s worldwide terms and conditions, specifically the warranty therein, which covers fairchild products. always visit fairchild semiconductor?s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ . do-35 25.40 min (2x) 0.533 0.460 4.56 3.05 1.91 1.53 notes: unless otherwise specified a) package standard reference: jedec do-204, variation ah. b) hermetically sealed glass package. c) package weight is 0.137 gram. d) all dimensions are in millimeters. e) drawing file name: do35arev02
? fairchild semiconductor corporation www.fairchildsemi.com trademarks the following includes registered and unregistered trademarks and service marks, owned by fairchild semiconductor and/or its gl obal subsidiaries, and is not intended to be an exhaustive list of all such trademarks. 2cool accupower ax-cap ? * bitsic build it now coreplus corepower crossvolt ctl current transfer logic deuxpeed ? dual cool? ecospark ? efficientmax esbc fairchild ? fairchild semiconductor ? fact quiet series fact ? fast ? fastvcore fetbench fps f-pfs frfet ? global power resource sm greenbridge green fps green fps e-series g max gto intellimax isoplanar making small speakers sound louder and better? megabuck microcoupler microfet micropak micropak2 millerdrive motionmax mwsaver optohit optologic ? optoplanar ? ? powertrench ? powerxs? programmable active droop qfet ? qs quiet series rapidconfigure saving our world, 1mw/w/kw at a time? signalwise smartmax smart start solutions for your success spm ? stealth superfet ? supersot -3 supersot -6 supersot -8 supremos ? syncfet sync-lock? ?* tinyboost tinybuck tinycalc tinylogic ? tinyopto tinypower tinypwm tinywire transic trifault detect truecurrent ? * p serdes uhc ? ultra frfet unifet vcx visualmax voltageplus xs? * trademarks of system general corporation, used under license by fairchild semiconductor. disclaimer fairchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function, or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. these specifications do not expand the terms of fairchilds worldwide terms and conditions, specifically the warranty therein, which covers these products. life support policy fairchilds products are not authorized for use as critical components in life support devices or systems without the express written approval of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. a critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. anti-counterfeiting policy fairchild semiconductor corporation's anti-counterfeiting policy. fairchild's anti-counterfeiting policy is also stated on our external website, www.fairchildsemi.com, under sales support. counterfeiting of semiconductor parts is a growing problem in the industry. all manufacturers of semiconductor products are exp eriencing counterfeiting of their parts. customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substa ndard performance, failed applications, and increased cost of production and manufacturing delays. fairchild is taking strong measures to protect ourselv es and our customers from the proliferation of counterfeit parts. fairchild strongly encourages customers to purchase fairchild parts either directly from fa irchild or from authorized fairchild distributors who are listed by country on our web page cited above. products customers buy either from fairchild directly or fr om authorized fairchild distributors are genuine parts, have full traceability, meet fairchild's quality standards for handling and storage and provide access to fa irchild's full range of up-to-date technical and product information. fairchild and our authorized distributors will stand behind all warranties and will appropriately addr ess any warranty issues that may arise. fairchild will not provide any warranty coverage or other assistance for parts bought from unauthorized sources. fairchild is c ommitted to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors . product status definitions definition of terms datasheet identification product status definition advance information formative / in design datasheet contains the design specifications for product development. specifications may change in any manner without notice. preliminary first production datasheet contains preliminary data; supplementary data will be published at a later date. fairchild semiconductor reserves the right to make changes at any time without notice to improve design. no identification needed full production datasheet contains final specifications. fairchild semiconductor reserves the right to make changes at any time without notice to improve the design. obsolete not in production datasheet contains specifications on a product that is discontinued by fairchild semiconductor. the datasheet is for reference information only. rev. i64 ?
|
